|
To
Receive Dealer Info & Our Newsletter, Sign Up Below:
|
|
AMSOIL Synthetic
2-Cycle Oils
AMSOIL Synthetic 2-Cycle
Oils are superior quality lubricants which provide maximum protection
and outstanding performance in two-cycle gasoline engines.
AMSOIL Synthetic 2-Cycle oils are high film strength oils so
metal-to-metal contact is minimized and wear is reduced. High
oil film strength reduces friction so operating temperatures are
controlled and maximum engine performance is gained. AMSOIL
Synthetic 2-Cycle Oils are ashless and resist high temperature
deposits to promote clean burning. These oils do not form gum,
varnish, sludge or sticky deposits. Spark plug fouling and
excessive carbon build-up on piston domes and exhaust ports are
virtually eliminated. |
Mike LaRocco #5
--2000 World Supercross
Champion
--Two-time National
Champion |
 |
AMSOIL Series 2000
Synthetic 2-Cycle Oil (stock # TCR)
AMSOIL Series 2000 Synthetic 2-Cycle Racing
Oil (TCR) is recommended in air or water-cooled two-cycle motors where
NMMA TC-W3, API TC or JASO FC oils are specified. Excellent for both
racing and recreational use in snowmobiles, outboard motors, personal
watercraft, motorcycles and ATVs. AMSOIL TCR is fortified with corrosion
inhibitors to prevent rust from condensation at shut down and during
off-season storage. AMSOIL TCR is fully compatible with TC-W3 lubricants
and most other two-cycle oils. Not recommended for use with nitro-methane
or methanol alcohol.
Maximum performance is attained at a 50:1 mix
ratio under both racing and recreational use. Richer mix ratios are not
recommended. (Mix 2.5 oz. of Oil to 1 U.S. Gallon of Gasoline). Note:
Use as packaged in all oil injection systems.
Meets or Exceed the Following
- NMMA TC-W3
- API TC, JASO FC
Order Now! or View Prices & Add'l AMSOIL Products |
 |
AMSOIL Synthetic 2-Cycle Injector Oil (stock # AIO)
AMSOIL Synthetic 2-Cycle Injector Oil (AIO) is recommended for use in all
summer and winter two-cycle injector applications and for pre-mix
applications at 50:1 mix ratios. Use AMSOIL 2-Cycle Injector Oil wherever
TC-W3 or API TC oils are specified in water cooled or air-cooled motors.
AMSOIL Synthetic 2-Cycle Injector Oil is recommended for all two-cycle
injector applications, including outboard motors, snowmobiles,
motorcycles, ATVs and personal watercraft. AMSOIL Synthetic 2-Cycle
Injector Oil is compatible with and recommended for two-cycle applications
using catalytic converters. AMSOIL Synthetic 2-Cycle Injector Oil is
compatible with other synthetic and petroleum TC-W3 type oils and may be
mixed with them. It is recommended for use with gasoline fuels only.
Meets or Exceeds the Following
- API TC, JASO FC
- ISO EGD
- NMMA TC-WII, TC-W3
Order Now! or View Prices & Add'l AMSOIL Products |
 |
AMSOIL Synthetic 100:1 Pre-Mix 2-Cycle Oil
(stock# ATC) AMSOIL Synthetic 100:1 Pre-Mix 2-Cycle Oil (ATC) is
recommended for all water-cooled and air-cooled pre-mix applications.
A mix ration of 100:1 is recommended for normal duty service in applications
such as motorcycles, outboard motors, weed eaters, lawn mowers and chain
saws. Richer mix ratios of 50:1 to 80:1 are recommended for severe
duty service such as racing applications, ultra light "kit" type airplanes
and for hot operating industrial use motors that run for extended periods of
time. AMSOIL Synthetic 100:1 Pre-Mix 2-Cycle Oil is recommended for all
pre-mix applications specifying TC-W3, API TC, JASO FC and ISO EGD. It
is recommended for use with gasoline fuels only, and is not recommended for
use in oil injection systems.
Meets or Exceeds the Following
- API TC, JASO FC
- ISO EGD
- NMMA TC-WH, TC-W3
Order Now! or View Prices & Add'l AMSOIL Products |
|
